LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector(s) to the back of the switch.
  2. Fig 1: Locating Headlamp Switch
    GM296152Courtesy of GENERAL MOTORS CORP.
  3. Install the headlamp switch to the plate by snapping the switch into place.
  4. Install the instrument panel cluster trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel and Gages.
  5. Connect the battery negative cable.