LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Inflatable Restraint I/P Module Retaining Bolts
    GM388352Courtesy of GENERAL MOTORS CORP.
  1. Install the inflatable restraint I/P module (3).
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 2 bolts (2) that retain the inflatable restraint I/P module to the I/P carrier.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Fig 2: View Of I/P Module Yellow 2-Way Connector
    GM189085Courtesy of GENERAL MOTORS CORP.
  5. Install the inflatable restraint I/P module connector (1).
  6. Install the CPA retainer (2).
  7. Install the clip that retains the inflatable restraint I/P module harness to the I/P (3).
  8. Install the right knee bolster. Refer to Knee Bolster Replacement - Right in Instrument Panel, Gages and Console.
  9. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .