Removal Procedure
- Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
- Remove the window outer sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer .
- Remove the door weatherstrip. Refer to Weatherstrip Replacement - Rear Door .
- Remove the door window channel. Refer to Window Run Channel Replacement - Rear Door .
- Remove the door lock. Refer to Lock Replacement - Rear Door (Without Power Locks) Lock Replacement - Rear Door (With Power Locks) .
- Remove the outside door handle. Refer to Door Handle Replacement - Rear Outside .
- Remove the door window regulator. Refer to Window Regulator Replacement - Rear Door (Without Power Windows) or Window Regulator Replacement - Rear Door (With Power Windows) .
- Remove the rear side door stationary window. Refer to Window Replacement - Rear Door Stationary .
- Remove the door check. Refer to Door Check Link Replacement - Rear .
- Remove the door molding. Refer to Molding Replacement - Rear Door Body Side in Exterior Trim.
- Support the rear side door (2) using a floor jack (1) and piece of wood.
- Mark the position of the door to the hinges in order to ease the installation process.
- Remove the 4 bolts which secure the door to the hinges.
- Position the door away from the door jamb in order to gain the necessary clearance to remove the rear side door wiring harness grommet, if equipped.
- Unclip the plastic retainers which secure the rear side door wiring harness (3) to the rear side door, if equipped.
- Release the door wiring harness grommet and unroute the wiring harness (3) from the door, if equipped.
- Remove any remaining retainers from the rear side door.
- Remove the rear side door from the vehicle.