LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Seal Replacement >> Installation Procedure

Installation Procedure

  1. Install the exhaust manifold pipe gasket.
    Fig 1: Installing Exhaust Manifold Pipe Gasket
    G01485983Courtesy of GENERAL MOTORS CORP.
  2. Return the exhaust system to the proper position.
  3. Connect any hangers.
  4. Remove the exhaust system support.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  5. Install the right exhaust manifold pipe stud nuts to the exhaust manifold pipe studs.

    Tighten 

    Tighten the right exhaust manifold pipe stud nuts to 35 N.m (26 lb ft).

  6. Inspect the exhaust system for leaks and underbody contact.
  7. Lower the vehicle.
    Fig 2: Installing Right Exhaust Manifold Pipe Stud Nuts To Exhaust Manifold Pipe Studs
    G01485984Courtesy of GENERAL MOTORS CORP.