LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Starter Motor Replacement >> Removal Procedures (2.5L)

Removal Procedures (2.5L)

  1. Disconnect the negative battery cable. Disconnect the starter solenoid electrical connector. Remove the retaining nut and positive battery cable from the starter solenoid.
  2. Raise and support the vehicle. Remove the 2 bolts from the starting motor. See Fig 1 .
  3. Lower the vehicle. Remove the starting motor through the front area of the engine compartment between the generator and the inner fender.
Fig 1: Identifying Starter Motor Mounting Bolts
G00357995Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals