Test Description
The numbers below refer to the step numbers on the diagnostic table.
- 4: This step tests for fuel leaks below the fuel tank fuel level.
- 5: This step test is to locates fuel vapors escaping above the fuel level in the fuel tank.
Fuel Tank Leak Test
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you perform the Diagnostic System Check-Engine Controls? | Go to Step 2 | Go to Diagnostic System Check - Engine Controls |
| 2 |
IMPORTANT:
Before performing this procedure, place a dry chemical (class B) fire extinguisher near the work area.
|
Go to Step 6 | Go to Step 3 |
| 3 |
|
Go to Step 7 | Go to Step 4 |
| 4 |
IMPORTANT:
Do not exceed 15 in H2O.
|
Go to Step 6 | Go to Step 5 |
| 5 |
IMPORTANT:
It may be necessary to partially lower the fuel tank. Refer to Fuel Tank Replacement
.
|
Go to Step 8 | Go to Diagnostic Aids |
| 6 | Replace the fuel tank. Refer to Fuel Tank Replacement
. Did you complete the repair? |
Go to Step 8 | - |
| 7 | Replace the leaking fuel pipe. Refer to Fuel Hose/Pipes Assembly Replacement
. Did you complete the replacement? |
Go to Step 8 | - |
| 8 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |