LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Venture Value >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Troubleshooting >> Specifications

HVAC Systems - Troubleshooting: Specifications

SPECIFICATIONS

Application Specification
Compressor Type
Without Auxiliary A/C Unit C69 Mitsubishi
With Auxiliary A/C Unit C60 Mitsubishi
Compressor Belt Tension (1)
Refrigerant (R-134a) Capacity
Without Auxiliary Unit 1.68 lbs.
With Auxiliary Unit 2.20 lbs.
System Oil Capacity (2)
With Compressor Replacement
Without Auxiliary A/C (3)(4)
With Auxiliary A/C (3)(5)
With Condenser Replacement 0.7 ozs.
With Evaporator Replacement
Auxiliary 1.4 ozs.
Front 2.0 ozs.
With Receiver Dehydrator Replacement 0.3 ozs.
Total
Without Auxiliary A/C Unit 7.1 ozs.
With Auxiliary A/C Unit 7.8 ozs.
System Operating Pressures (6)
High Side 158-191 psi (1090-1320 kPa)
Low Side 29-36 psi (198-246 kPa)
(1) Belt tension is adjusted automatically by a spring-tensioned idler pulley. Belt adjustment is not required.
(2) Use PAG (Polyalkylene Glycol) oil. GM P/N 12345923 (US), GM P/N 10953486 (Canada).
(3) If more than the specified amount of PAG oil was drained from a component, add the equal amount drained.
(4) Mitsubishi scroll replacement compressor with front A/C only is precharged with 2.7 ozs. of PAG oil.
(5) Mitsubishi scroll replacement compressor with auxiliary A/C is precharged with 3.4 ozs. of PAG oil.
(6) Approximate operating pressures with relative humidity greater than 35 percent, ambient temperature at 80°F (29.4°C) and engine at idle.