Installation Procedure
- Install the exhaust manifold heat shield with the 4 nuts.
Tighten: Tighten the exhaust manifold heat shield nuts to 10 N.m (89 lb in).
- Install the oxygen sensor. Refer to INSTALLATION (HO2S 1) in Engine Controls - 4.2L.
- Install the oil level indicator. Refer to OIL LEVEL INDICATOR AND TUBE REMOVAL .
- Move the transmission filler tube back onto the stud and secure the tube with the nut.
Tighten: Tighten the transmission filler tube bracket nut to 10 N.m (89 lb in).
- Install the air cleaner resonator outlet duct.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.