LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Seal Replacement >> Installation Procedure

Installation Procedure

  1. Install a NEW exhaust seal.
  2. Raise the front of the catalytic converter.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the left and right exhaust manifold nuts.

    Tighten 

    Tighten the exhaust manifold nuts to 20 N.m (15 lb ft).

    Fig 1: Installing Exhaust Manifold Nuts
    G01695614Courtesy of GENERAL MOTORS CORP.
  4. Install the exhaust pipe hanger lower bolts.

    Tighten 

    Tighten the exhaust pipe hanger bolts to 50 N.m (37 lb ft).

    Fig 2: Installing Exhaust Pipe Hanger Bolts
    G01695615Courtesy of GENERAL MOTORS CORP.
  5. Install the exhaust pipe brace lower bolts.

    Tighten 

    Tighten the exhaust pipe brace bolts to 50 N.m (37 lb ft).

  6. Remove the adjustable jack stand.
  7. Lower the vehicle.
    Fig 3: Installing Exhaust Pipe Brace Lower Bolts
    G01695616Courtesy of GENERAL MOTORS CORP.