LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Impala LS >> Repair and Diagnosis >> Suspension >> Wheel Alignment Specifications & Adjustment Procedures >> Ride Height Adjustment >> Checking Procedure >> "J" Body

"J" Body

  1. Push front bumper down about 1.5" (38 mm). Let vehicle settle. Repeat 3 times. Measure dimension "Z". See Figure. See RIDE HEIGHT SPECIFICATIONS ("J" BODY)  table.
  2. Lift rear bumper up about 1.5" (38 mm). Let vehicle settle. Repeat 2 more times. Measure dimension "D". See Figure. See RIDE HEIGHT SPECIFICATIONS ("J" BODY)  table.
  3. Measure dimensions "A" and "B" to locate measuring points "J" and "K". Measure dimensions "J"and "K" between underbody and floor, and center of wheel well and floor. See Figure. See RIDE HEIGHT SPECIFICATIONS ("J" BODY)  table.
scientia non olet · About LEMON Manuals