Code Enable Criteria
NOTE:
If start-up ECT is less than 20°F (7°C), misfire detection is delayed until ECT is greater than 70°F (21°C). If start-up ECT is greater than 20°F (7°C), misfire detection begins after a 5 second delay.
Conditions for running DTC:
- DTCs P0101, P0102, P0103, P0117, P0118, P0128, P0335, P0336, P0341, P0343, P0500, P0502, P0503, P1114, P1115, P1121, P1122, P1220, P1258, P1336 or P1345 is not set
- Fuel level is more than 10 percent
- Engine speed is 450-5000 RPM.
- System voltage is 11-16 volts.
- Throttle position is steady within 2 percent for 100 milliseconds.
Conditions for setting DTC:
- PCM detects a deceleration in crankshaft speed that is characteristic of either an emission type misfire or of a catalyst-damaging type misfire.