LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Tracker 4WD L4-2.0L VIN C >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair

Brake Light Switch: Service and Repair

Removal Procedure





1. Disconnect the stoplamp switch connector.
2. Remove the stoplamp switch nut (1) and the stoplamp switch (2).


Installation Procedure

Important: DO NOT tighten the stoplamp switch nut before adjusting the stoplamp switch.





1. Install the stoplamp switch (2) to the bracket. Secure with the nut (1).
2. Connect the stoplamp switch connector.
3. Adjust the stoplamp switch. Refer to Stoplamp Switch Adjustment.