LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Tracker 4WD L4-2.0L VIN C >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Wheel Speed Sensor Ring Replacement >> Front

Front

Removal Procedure





1. Remove the Front Wheel Hub. Refer to Wheel Hub Bearing, and Seal Replacement.
2. Remove the ABS reluctor ring (1) from the wheel hub (2) by prying the


Installation Procedure

^ Tools Required
- J 39245 ABS Sensor Ring Installer ring away from the hub.





1. Using J 39245, press the ABS reluctor ring (2) onto the wheel hub.
2. Install the Front Wheel Hub. Refer to Wheel Hub Bearing, and Seal Replacement.
3. Perform A Diagnostic System Check - ABS. Diagnostic System Check