Test B: Power Door Lock Function Inoperative - One Switch
- Perform SYSTEM OPERATION CHECK under TROUBLE SHOOTING. Go to next step.
- If either switch can unlock doors, go to next step. If neither switch can unlock doors, go to step 6 .
- Test Blue/White wire between multifunction alarm module and SP252 for open. If problem was found, go to next step. If problem was not found, go to step 5 .
- Repair open in Blue/White wire or replace SP252 as needed. After repair, perform SYSTEM OPERATION CHECK under TROUBLE SHOOTING.
- Replace multifunction alarm module. See MULTIFUNCTION ALARM MODULE under REMOVAL & INSTALLATION. After repair, perform SYSTEM OPERATION CHECK under TROUBLE SHOOTING.
- If either switch can lock doors, go to next step. If neither switch can lock doors, go to step 5 .
- Test Blue/Yellow wire between multifunction alarm module and SP252 for open. If problem was found, go to next step. If problem was not found, go to step 5 .
- Repair open in Blue/Yellow wire or replace SP252 as needed. After repair, perform SYSTEM OPERATION CHECK under TROUBLE SHOOTING.