LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Prizm Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Diagnostic Tests >> DTC 32: Cruise Control Functional Switches Shorted

DTC 32: Cruise Control Functional Switches Shorted

  1. If preliminary inspection has been performed, go to next step. If preliminary inspection has not been performed, go to PRELIMINARY INSPECTION  under TROUBLE SHOOTING.
  2. Turn ignition switch to OFF position. Disconnect Cruise Control Module (CCM) harness connector. See COMPONENT LOCATIONS  . Measure resistance between ground and CCM harness connector terminal No. 11 (White/Blue wire). See Figure . If resistance is infinite, leave ohmmeter connected and go to next step. If resistance is not infinite, go to step  9 .
  3. With ohmmeter still connected between ground and CCM harness connector terminal No. 11, press in and hold cruise lever to CRUISE ON/OFF position. If resistance is 0-2 ohms, go to next step. If resistance is not 0-2 ohms, go to step  9 .
  4. Measure resistance in Green/Black wire between ground and CCM harness connector terminal No. 10. If resistance is infinite, leave ohmmeter connected and go to next step. If resistance is not infinite, go to step  16 .
  5. With ohmmeter still connected between ground and CCM harness connector terminal No. 10, pull cruise lever back to CANCEL position and hold. If resistance is 415-425 ohms, leave ohmmeter connected and go to next step. If resistance is not 415-425 ohms, go to step  21 .
  6. With ohmmeter still connected between ground and CCM harness connector terminal No. 10, move cruise lever down toward SET/COAST position and hold. If resistance is 195-205 ohms, leave ohmmeter connected and go to next step. If resistance is not 195-205 ohms, go to step  21 .
  7. With ohmmeter still connected between ground and CCM harness connector terminal No. 10, move cruise lever up toward RES/ACC position and hold. If resistance is 65-75 ohms, go to next step. If resistance is not 65-75 ohms, go to step  21 .
  8. Check CCM harness connector for poor connection. If CCM connection is okay, replace CCM. See CRUISE CONTROL MODULE (CCM)  under REMOVAL & INSTALLATION. After repair, check cruise control system for normal operation.
  9. Ensure CCM harness connector is disconnected. Disable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article. Place front wheels straight ahead. Remove steering wheel. Remove steering column upper and lower trim covers. Disconnect inflatable restraint steering wheel module coil harness connector C2. Measure resistance between inflatable restraint steering wheel module coil harness connector C2 terminals No. 3 (White/Black wire) and No. 5 (White wire). If resistance is infinite, leave ohmmeter connected and go to next step. If resistance is not infinite, go to step  21 .
  10. With ohmmeter still connected between inflatable restraint steering wheel module coil harness connector C2 terminals No. 3 and No. 5, press in and hold cruise lever to CRUISE ON/OFF position. If resistance is 0-2 ohms, go to next step. If resistance is not 0-2 ohms, go to step  21 .
  11. Ensure CCM harness connector is disconnected. Measure resistance in White wire between ground and inflatable restraint steering wheel module coil harness connector C2 terminal No. 5. If resistance is not infinite, go to next step. If resistance is infinite, return to step  2 .
  12. Disconnect inflatable restraint steering wheel module coil harness connector C1. Measure resistance in White/Blue wire between ground and inflatable restraint steering wheel module coil harness connector C1 terminal No. 5. If resistance is infinite, go to next step. If resistance is not infinite, go to step  14 .
  13. Measure resistance in White/Blue wire between inflatable restraint steering wheel module coil harness connector C1 terminal No. 5 and CCM harness connector terminal No. 11. If resistance is infinite, return to step. 2 . If resistance is not infinite, go to step  15 .
  14. Replace inflatable restraint steering wheel module coil. See appropriate AIR BAG RESTRAINT SYSTEMS article. After repair, check cruise control system for normal operation.
  15. Repair short to ground in White/Blue wire between inflatable restraint steering wheel module coil harness connector C1 terminal No. 5 and CCM harness connector terminal No. 11. See WIRING DIAGRAMS  . After repair, check cruise control system for normal operation.
  16. Ensure CCM connector is disconnected. Disconnect inflatable restraint steering wheel module coil harness connector C2. Measure resistance between inflatable restraint steering wheel module coil harness connector C2 terminals No. 3 (White/Black wire) and No. 4 (Red wire). If resistance is infinite, go to next step. If resistance is not infinite, go to step  21 .
  17. Measure resistance in Red wire between ground and inflatable restraint steering wheel module coil harness connector C2 terminal No. 4. If resistance is not infinite, go to next step. If resistance is infinite, go to step  4 .
  18. Disconnect inflatable restraint steering wheel module coil harness connector C1. Measure resistance in Green/Black wire between ground and inflatable restraint steering wheel module coil harness connector C1 terminal No. 4. If resistance is infinite, go to next step. If resistance is not infinite, go to step  14 .
  19. Measure resistance in Green/Black wire between inflatable restraint steering wheel module coil harness connector C1 terminal No. 4 and CCM harness connector terminal No. 10. If resistance is not infinite, go to next step. If resistance is infinite, go to step  4 .
  20. Repair short to ground in Green/Black wire between inflatable restraint steering wheel module coil harness connector C1 terminal No. 4 and CCM harness connector terminal No. 10. See WIRING DIAGRAMS  . After repair, check cruise control system for normal operation.
  21. Check cruise control functional switches for poor connection. If connection is okay, replace cruise control functional switches. See CRUISE CONTROL FUNCTIONAL SWITCHES  under REMOVAL & INSTALLATION. After repair, check cruise control system for normal operation.