LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1999 >> Cutaway 6.5 F >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Link Communications System >> System Tests >> Data Link Communications System Check

Data Link Communications System Check

  1. With scan tool connected make contact with any of the modules applicable to vehicle. If scan tool screen is blank or scan tool does not power up, see SCAN TOOL INOPERATIVE/DOES NOT COMMUNICATE WITH COMPONENTS  .
  2. Select "diagnostics circuit check, Class 2 DTC check" from scan tool menu. If there are any DTCs that start with a "U", see DTC U1016: LOSS OF COMMUNICATIONS WITH PCM, DTC U1041: LOSS OF EBCM COMMUNICATION & DTC U1192: LOSS OF PASSLOCK(tm) CLASS 2 COMMUNICATION  under DIAGNOSTIC TESTS. If there is no communication with vehicle or with data link connector, see SCAN TOOL INOPERATIVE/DOES NOT COMMUNICATE WITH COMPONENTS  .
  3. Select "body diagnostics" from scan tool menu. Select "SIR UART Data Line information". Access DTCs using scan tool. If there is no communication with vehicle or with data link connector, see SCAN TOOL DOES NOT COMMUNICATE WITH UART DATA LINE  .
  4. Establish communication with Electronic Brake Control Module (EBCM). Access DTCs using scan tool. If there is no communication with vehicle or with data link connector, see DTC U1016: LOSS OF COMMUNICATIONS WITH PCM, DTC U1041: LOSS OF EBCM COMMUNICATION & DTC U1192: LOSS OF PASSLOCK(tm) CLASS 2 COMMUNICATION  under DIAGNOSTIC TESTS.
  5. Establish communication with PCM/VCM. Access DTCs using scan tool. If there is no communication with vehicle or with data link connector, see DTC U1016: LOSS OF COMMUNICATIONS WITH PCM, DTC U1041: LOSS OF EBCM COMMUNICATION & DTC U1192: LOSS OF PASSLOCK(tm) CLASS 2 COMMUNICATION  under DIAGNOSTIC TESTS.