Trim Panel: Removal
- Remove 2 screws and armrest cover. Slide the armrest cover toward the rear of the door. See Fig 1
.
- Remove window handle using Door Handle Clip Remover (J 09886-01), if equipped. See SPECIAL TOOLS
.
- Remove assist handle covering using Door Trim Pad and Garnish Clip Remover (J 38778). Pry the cover from the door near the clips. Disconnect switch connectors. See Fig 2
.
- Remove screw from behind the armrest pad.
- Remove trim panel retainers from the door using Door Trim Pad and Garnish Clip Remover (J 38778).
- Remove trim panel from the door.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.