LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1985 >> Camaro Base, 2.5 2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Cooling System Specifications) >> Cooling System Specifications >> Maintenance >> Bleeding

Cooling System Specifications: Maintenance: Bleeding

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 1985 Pontiac Sunbird, 1985 Pontiac Parisienne, 1985 Pontiac Grand Prix, 1985 Pontiac Grand Am, and 1985 Pontiac Firebird. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove thermostat from vehicle and install thermostat cover. Fill cooling system to bottom of radiator filler neck. Start and run engine for 3 minutes. Accelerate engine to fast idle for 15-20 seconds. Turn engine off.
  2. To relieve system pressure, loosen thermostat filler cap. Once pressure is released, remove thermostat filler cap. Fill coolant system to bottom of thermostat filler neck. Install thermostat and filler cap. Start and run engine until cooling fan cycles once. Fill coolant reservoir to proper level.
scientia non olet · About LEMON Manuals