LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1984 >> Chevette CS, 2D Hatchback, 1.8 D, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - 200C >> Component Disassembly & Reassembly >> Intermediate Servo >> Reassembly

Intermediate Servo: Reassembly

  1. Install retainer on band apply pin and install snap ring. Install band apply pin (retainer end first) through servo pistons. Install new inner and outer seal rings on piston (if removed).
  2. Ensure seal ring ends are assembled in the same relationship as cut and seal rings are seated in grooves. Lubricate with petroleum jelly and install new seal ring on intermediate servo cover. Install servo piston assembly into servo cover.
Fig 1: Exploded View of Intermediate Servo Assembly
G96J15866Courtesy of GENERAL MOTORS CORP.