LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1984 >> Chevette CS, 2D Hatchback, 1.8 D, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Carburetor - HOLLEY 6510-C 2-Bbl >> Adjustments >> Float Level

Float Level

  1. With air horn removed, turn carburetor upside down. Allow weight of float to press down against float needle valve. See Fig 1 .
    Fig 1: Float Level Adjustment Bend tang to adjust.
    G468
  2. Measure float level clearance between top of float and air horn gasket surface. Clearance can be checked using a drill or pin gauge.
  3. Make sure float tang still rests on float needle when clearance is checked. To adjust, bend float tang.
NOTE: DO NOT  apply pressure to float needle while checking or changing adjustment.