LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 1983 >> Camaro Base, 2.8 1, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Feedback Carburetor Tests W/Codes >> Removal & Installation >> Oxygen Sensor

Oxygen Sensor

Raise and support vehicle (if required). Disconnect electrical connector at harness. Spray threads of oxygen sensor with penetrating oil and allow to soak for 5 minutes. Carefully remove oxygen sensor.

NOTE: DO NOT  attempt to reinstall an oxygen sensor. Reinstallation of a sensor without special glass bead thread coating may require complete replacement of exhaust system.