Installation Procedure
WARNING: This page is about a different car, the 2019 Cadillac XT5. However, it is still accessible from the selected car via links, so may be relevant.
Generator (2) - Install
- Generator Bolt (1) Install and tighten [2x] 22 N.m (16 lb ft)
Drive Belt Idler Pulley (2) - Install - Drive Belt Idler Pulley Replacement
Electrical Connector (4) - Connect
- Battery Positive Cable (1) - Install
- Battery Positive Cable Nut (2) @ Generator - Install and tighten 15 N.m (11 lb ft)
- Protective Cap (3) - Install
Install the drive belt. (1) - Install - Drive Belt Replacement
Air Conditioning Refrigerant Pressure Sensor (1) - Install - Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement
Front Bumper Fascia (3) - Install - Front Bumper Fascia Replacement
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution