Component Testing
- Ignition OFF, disconnect the harness connector at the S52 Outside Rearview Mirror Switch.
- Test for infinite resistance between the signal terminal 12 and the low reference terminal 11 with the mirror direction switch in the open position.
- If less than infinite resistance
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for 330 - 350 Ω between the signal terminal 12 and the low reference terminal 11 with the mirror direction switch in the Left position.
- If less than 329 Ω or greater than 351 Ω
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 330 - 350 Ω
- If less than 329 Ω or greater than 351 Ω
- Test for 0.65 - 0.75 KΩ between the signal terminal 12 and the low reference terminal 11 with the mirror direction switch in the Right position.
- If less than 0.64 KΩ or greater than 0.76 KΩ
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 0.65 - 0.75 KΩ
- If less than 0.64 KΩ or greater than 0.76 KΩ
- Test for 1.3 - 1.5 KΩ between the signal terminal 12 and the low reference terminal 11 with the mirror direction switch in the Up position.
- If less than 1.29 KΩ or greater than 1.55 KΩ
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 1.3 - 1.5 KΩ
- If less than 1.29 KΩ or greater than 1.55 KΩ
- Test for 3.2 - 3.4 KΩ between the signal terminal 12 and the low reference terminal 11 with the mirror direction switch in the Down position.
- If less than 3.1 KΩ or greater than 3.5 KΩ
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 3.2 - 3.4 KΩ
- If less than 3.1 KΩ or greater than 3.5 KΩ
- Test for 1 - 0.9 KΩ between the signal terminal 5 and the low reference terminal 11 with the mirror selector switch in the Passenger position.
- If less than 1 KΩ or greater than 0.8 KΩ
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 1 - 0.9 KΩ
- If less than 1 KΩ or greater than 0.8 KΩ
- Test for 305 - 312 Ω between the signal terminal 5 and the low reference terminal 11 with the mirror selector switch in the Driver position.
- If less than 304 Ω or greater than 313 Ω
Replace the S52 Outside Rearview Mirror Switch.
- Go to next step: If between 305 - 312 Ω
- If less than 304 Ω or greater than 313 Ω
- All OK