Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
When installing the intermediate steering shaft outer boot, ensure the boot is aligned under the hood by using the arrows on the boot as a guide.

Slide the intermediate steering shaft outer boot (1) over the upper intermediate steering shaft and through the vehicle sheet metal.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Intermediate Steering Shaft Outer Boot Nut (1) - Install and tighten [4x] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Mid Intermediate Steering Shaft (1)@Upper Intermediate Steering Shaft - Install
Courtesy of GENERAL MOTORS COMPANY

Mid Intermediate Steering Shaft Bolt (1) - Install and tighten 30 N.m (22 lb ft)
1. Clean the threads of the bolt and mating threads with denatured alcohol or equivalent and allow to dry.
2. Apply thread locking adhesive to the bolt. Adhesives, Fluids, Lubricants, and Sealers
Courtesy of GENERAL MOTORS COMPANY

Power Vacuum Brake Booster (1) - Install - Power Vacuum Brake Booster Replacement
Courtesy of GENERAL MOTORS COMPANY

Intermediate Steering Shaft (1) - Install - Intermediate Steering Shaft Replacement (RWD) Intermediate Steering Shaft Replacement (AWD)
Courtesy of GENERAL MOTORS COMPANY

Push the intermediate steering shaft outer boot (1) into the vehicle pass through and secure all of the plastic clips.
Courtesy of GENERAL MOTORS COMPANY

Intermediate Steering Shaft Inner Boot (1) - Install - Intermediate Steering Shaft Boot Replacement (Outer, LGX)