Airbag Sensing and Diagnostic Module Replacement
WARNING: This page is about a different car, the 2013 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
Airbag Sensing and Diagnostic Module Replacement
| Callout | Component Name |
|---|---|
|
WARNING:
Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
WARNING:
Refer to SIR Warning . Preliminary Procedures
|
|
| 1 | Inflatable Restraint Sensing and Diagnostic Module Fastener (Qty: 3)
CAUTION:
Refer to Fastener Caution . Tighten 9 (80 lb in) |
| 2 | Inflatable Restraint Sensing and Diagnostic Module Assembly
NOTE:
When installing, ensure the arrow on the module is pointed towards the front of the vehicle. Procedure If installing a replacement module, program the module. Refer to Control Module References . |