Removal Procedure
- Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Courtesy of GENERAL MOTORS COMPANY
- Remove the heat shield fastener (1) and heat shield (2) from the starter.
- Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement
.
- Disconnect the knock sensor connector.
Courtesy of GENERAL MOTORS COMPANY
- Remove the battery positive fastener (1) and the engine harness connector (2), from the starter solenoid (3).
Courtesy of GENERAL MOTORS COMPANY
- Remove the starter motor fasteners (1).
- Remove the starter motor (2).