LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> Escalade EXT >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Body Electrical >> SES Light Reduced Engine Power Mode And App Sensor DTCS (PIP3783D)

SES Light Reduced Engine Power Mode And App Sensor DTCS (PIP3783D)

Publication date: 2014-07-16
Reference number: PIP3783D
Supersedes refnos: PIP3783, PIP3783A, PIP3783B, PIP3783C

SES LIGHT REDUCED ENGINE POWER MODE AND APP SENSOR DTCS

SES LIGHT REDUCED ENGINE POWER MODE AND APP SENSOR DTCS

TECHNICAL SERVICE BULLETIN

Reference Number(s): PIP3783D, Date of Issue:  July 16, 2014
Affected Model(s): 2007-2014 Cadillac Escalade 2007-2014 Chevrolet Avalanche, Suburban, Tahoe 2007-2013 Chevrolet Silverado 2007- 2013 GMC Sierra 2007-2014 GMC Yukon Models *For New Body Style Trucks Only - Not for Classic Models
Supercedes: This PI was superseded to update Model Years. Please discard PIP3783C.

SERVICE INFORMATION

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

CONDITION/CONCERN

Some customers may complain of a SES light and reduced engine power message as a result of any of the following APP Sensor DTCs: P2120, P2122, P2123, P2125, P2127, P2128, and/or P2138.

In most cases, this concern is very intermittent so the technician may not be able to get the DTC(s) to reset so they can perform step by step diagnosis.

RECOMMENDATION/INSTRUCTIONS

If SI diagnosis does not isolate the cause of the DTC(s), inspect the related APP sensor circuits for potential shorts to ground or high voltage drop while manipulating the harness between the APP sensor and ECM.

Also inspect the related APP sensor circuits for poor terminal tension at the APP sensor and ECM connectors using the correct terminal test probes.

If there is no problem found, inspect C109/X109 and C205/X205 for the following concerns:

As outlined in the Master Electrical Component List in SI, C109/X109 is located on the left side of the engine compartment below the underhood fuse block and C205/X205 is located under the Upper Instrument Trim Panel. To access C205/X205, follow the Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement Procedure in SI.

If a terminal/wiring concern is found, repair it by following the related SI repair procedure. If the steps above do not isolate the cause of this concern, recrimp all of the APP circuit terminals at the APP sensor and ECM connectors using the correct terminal crimp tools as outlined in SI and the latest version of 08-06-03-009.

WARRANTY INFORMATION

For wiring repairs covered under warranty, please refer to latest version of bulletin 10-00-89-005 for warranty information on wire/connector repairs.

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.