Circuit/System Testing
- Ignition OFF, disconnect the X1 harness connector at the appropriate outside rearview mirror.
- Verify that a test lamp illuminates between B+ and the ground circuit terminal B.
- If the test lamp does not illuminate, test the ground circuit for an open/high resistance.
- Connect a test lamp between the control circuit terminal E and the ground circuit terminal B.
- Command the mirror heater ON and OFF with a scan tool. The test lamp should turn ON and OFF when changing between the commanded states.
- If the test lamp is always ON, test the control circuit for a short to voltage. If the circuit tests normal, replace the door control module.
- If the test lamp is always OFF, test the control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the door control module.
- If all circuits test normal, test or replace the outside rearview mirror glass.