LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> STS Base, 3.6 V, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Yaw Rate Sensor and Lateral Accelerometer
    GM1999094Courtesy of GENERAL MOTORS CORP.
  1. Install the yaw rate sensor and lateral accelerometer (1).
  2. CAUTION: Refer to Fastener Caution .
    Fig 2: View of Yaw Rate Sensor and Lateral Accelerometer Nuts
    GM1999093Courtesy of GENERAL MOTORS CORP.
  3. Install the yaw rate sensor and lateral accelerometer nuts (1).

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  4. Connect the yaw rate sensor and lateral accelerometer electrical connector.
  5. Position the carpet to the floor.
  6. Install the RF seat. Refer to Bucket Seat Replacement .
  7. Install a scan tool.
  8. Using the special functions menu on the scan tool, reset the yaw rate sensor.
  9. Perform the Diagnostic System Check - Vehicle .