LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Removal Procedure

Removal Procedure

    Fig 1: View of Fuel Feed Hose
    GM1685821Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
    NOTE:
    • Do not repair the fuel feed or return pipes.
    • Replace the fuel feed and return pipes with original equipment or with parts that meet the GM specifications for those parts. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
  1. Disconnect the negative battery cable.
  2. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
  3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027)  or Fuel Pressure Relief (With CH 48027) .
  4. Remove the secondary lock and disconnect the quick-connect fitting at the fuel rail (1). Refer to Metal Collar Quick Connect Fitting Service .
  5. Remove the secondary lock and disconnect the quick-connect fitting at the chassis fuel pipe (2). Refer to Metal Collar Quick Connect Fitting Service .
  6. Remove engine compartment fuel feed hose (3).
  7. Cap the chassis fuel pipe and the fuel rail pipe in order to prevent possible fuel system contamination.
  8. Inspect the hose for bends, for kinks, for chafing, and for cracks. Replace the hose as required.