Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) or Fuel Pressure Relief (With CH 48027) .
- Do not repair the fuel feed or return pipes.
- Replace the fuel feed and return pipes with original equipment or with parts that meet the GM specifications for those parts. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
- Disconnect the fuel feed hose (3) from the chassis fuel feed pipe (2). Refer to Metal Collar Quick Connect Fitting Service .
- Cap the engine compartment fuel feed pipe.
- Disconnect the chassis fuel and evaporative emission (EVAP) pipe retainer (1) from the upper front of dash mounting stud (3).
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the exhaust intermediate pipe. Refer to Intermediate Pipe Replacement .
- Remove the floor panel tunnel panel reinforcement. Refer to Floor Panel Tunnel Panel Reinforcement Replacement .
- Disconnect the chassis fuel pipe (5) from the underbody retainers (6).
- Remove the chassis fuel pipe.
CAUTION:
Refer to Battery Disconnect Caution
.
NOTE: