LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS Base, 3.6 V, AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Sensor and Bracket Replacement (Rear) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the rear ride sensor link from the upper control arm ball stud.
  4. Disconnect the rear ride sensor harness connector.
  5. Fig 1: View Of Rear Ride Sensor
    GM1371666Courtesy of GENERAL MOTORS CORP.
  6. Loosen the rear ride sensor retaining nut.
  7. Gently tap the rear ride sensor retaining stud in order to loosen the stud to fender connection.
  8. Remove the rear ride sender from the vehicle.