LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> STS Base, 3.6 V, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 3.6L - Introduction (2 Of 2) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

CAUTION: Allow sufficient time for the engine to cool before removing the ECT sensor. A hot engine may cause an excessive coolant loss or a personal injury.
    Fig 1: Identifying Front Compartment Sight Shields
    GM1958236Courtesy of GENERAL MOTORS CORP.
  1. Remove the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement .
  2. Reposition the engine wiring harness thermal tube (1) in order to access the engine coolant temperature (ECT) sensor.
  3. Disconnect the engine wiring harness electrical connector (2) from the ECT sensor (3).
  4. Fig 2: View Of ECT Sensor
    GM1285193Courtesy of GENERAL MOTORS CORP.
  5. Remove the coolant temperature sensor.