Installation Procedure
- Install the generator bracket.
- Install the generator bracket bolts.
Tighten: Tighten the bolts in the sequence shown.
- Tighten the generator bracket bolts (1, 2) to 50 N.m (37 lb ft).
- Tighten the generator bracket bolt (3) to 23 N.m (17 lb ft).
- Install the belt tensioner. Refer to Water Pump and Generator Belt Tensioner Replacement .
- Install the coolant inlet pipe lower bolt from the generator bracket.
- Install the generator. Refer to Generator Replacement (LY7) or Generator Replacement (LH2 w/AWD) or Generator Replacement (LH2 w/RWD) or Generator Replacement (LC3) .
NOTE:
Refer to Fastener Notice
.