LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Install the BPMV bracket (1) to the frame (3).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 3 BPMV bracket to frame bolts (2).

    Tighten 

    Tighten the 3 bolts to 10 N.m (89 lb in).

    Fig 1: Installing BPMV Bracket To Frame
    G02069268Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Make sure that all 3 rubber isolators are installed on the BPMV. The isolators protect the EBCM/BPMV assembly from vehicle vibrations.
  3. Install the EBCM/BPMV assembly (1) to the BPMV bracket (3).
  4. Install the 2 BPMV bracket nuts (2).

    Tighten 

    Tighten the 2 nuts to 10 N.m (89 lb in).

    Fig 2: Installing EBCM/BPMV Assembly To BPMV Bracket
    G02069269Courtesy of GENERAL MOTORS CORP.
  5. Install the left front fascia extension. Refer to BUMPER SYSTEM  in Bumpers.
  6. Install the left front wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION  in Tires and Wheels.
  7. Lower the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.