DTC B2462: GPS Signal Error: Description
WARNING: This page is about a different car, the 2000 Cadillac Catera. However, it is still accessible from the selected car via links, so may be relevant.
Radio Interface Module (RIM) checks for GPS signal every 2.5 seconds. If signal is not detected, DTC B2462 is set. For DTC B2462 to set, ignition must be in RUN or ACC position and battery voltage must be between 9.5-15.5 volts. DTC B2462 will clear when RIM detects GPS signal or when scan tool is used. A history DTC will clear after 50 consecutive ignition cycles if conditions for fault no longer exist.