Door Lock Inoperative With Transmitter - All Doors
- If remote keyless entry diagnostic system check was performed, go to next step. If remote keyless entry diagnostic system check was not performed, go to REMOTE KEYLESS ENTRY (RKE) DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM.
- Verify door lock function by depressing door mounted door lock switch to lock position. If door locks operate to lock position, go to next step. If power door locks do not operate to lock position, go to POWER DOOR LOCKS - DEVILLE & ELDORADO article.
- If doors will not lock with all transmitters, go to next step. If doors will not lock with only one transmitter, go to step 5 .
- Replace Remote Function Actuator (RFA) module. See REMOTE FUNCTION ACTUATOR (RFA) MODULE under REMOVAL & INSTALLATION.
- Replace faulty transmitter. After replacement, transmitter must be programmed. See TRANSMITTER PROGRAMMING under PROGRAMMING PROCEDURES.