LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Shift Control Cable >> Installation

Shift Control Cable: Installation

NOTE: Numbers in parenthesis correspond to numbers in illustration.
  1. Properly route and position cable, ensure proper installation of bulk head grommet, do not twist or sharply bend cable assembly. See Figure , Figure and Fig 1 .
  2. Install cable to shifter control stud pin.
  3. Secure carpet.
  4. Install console cover and shifter handle, assure proper alignment of shifter indicator (part of cover) with shifter.
  5. Install cable end pin to transaxle manual lever and cable housing to bracket.
  6. Adjust the cable as necessary. See SHIFT CONTROL CABLE & MANUAL LINKAGE  under ADJUSTMENTS.
  7. Tighten nut (6). See TORQUE SPECIFICATIONS  .
Fig 1: Identifying Shift Control Cable At Manual Shaft
G00106968Courtesy of GENERAL MOTORS CORP.