LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Basic Diagnostic Procedures) >> Introduction

Section 48 (Basic Diagnostic Procedures): Introduction

WARNING: This page is about a different car, the 1988 Cadillac Allante and 1987 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure.

Before proceeding with basic diagnostic procedures, ensure testing procedure is followed, as some systems which may result in a no-start condition may cause a Diagnostic Trouble Codes (DTC) to be stored in the Engine Control Module (ECM). See SELF-DIAGNOSTICS article.

If no-start condition still exists after checking and repairing all DTCs, perform a careful and complete visual inspection. Many problems result from mechanical breakdowns, poor electrical connections or damaged/misrouted vacuum hoses. Before condemning the computerized system, perform each test listed in this article.