LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Basic Diagnostic Procedures) >> Fuel Systems >> Fuel System Pressure Release

Fuel System Pressure Release

WARNING: This page is about a different car, the 1988 Cadillac Allante and 1987 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: ALWAYS release fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

Basic diagnosis of fuel system should begin by checking fuel pump operation and fuel pressure.

  1. Slowly remove the fuel tank cap to relieve any residual pressure in the fuel tank.
  2. Connect fuel gauge J-34730-1 or equivalent, to fuel pressure connection. Wrap a shop cloth around fitting while connecting gauge, to collect the fuel. Then, place the cloth in an approved container.
  3. Install bleed hose into an approved container and open valve to bleed system pressure.