LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Anti-Lock/Traction Control) >> Removal & Installation >> Pump/Motor Assembly Components >> Installation

Pump/Motor Assembly Components: Installation

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position mounting insulators on pump and bracket.
  2. Install pump in car an tighten mounting nut to specification. See TORQUE SPECIFICATIONS  .
  3. Install pressure and return hoses at pump. Tighten pressure hose fitting (banjo bolt) to 11 ft. lbs. (15 N.m).
  4. Connect pump motor connector.
  5. Install air intake duct in car and install clamps at the air cleaner and throttle body.
  6. Fill brake fluid reservoir to the FULL mark.
  7. Bleed pump and booster. See BLEEDING  .
Fig 1: Identifying Pump/Motor Assembly & Mounting Insulators
G00107516Courtesy of GENERAL MOTORS CORP.