LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Anti-Lock/Traction Control) >> Removal & Installation >> Electronic Brake Control Module (EBCM) >> Removal

Electronic Brake Control Module (EBCM): Removal

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove driver's side sound insulator panel.
  2. Disconnect EBCM connector by disengaging retainer and rotating connector toward the driver's seat.
  3. Remove EBCM retaining bolts. See Fig 1 .
  4. Disengage EBCM from mounting bracket and remove from car.
Fig 1: Locating EBCM, In-Line Brake Fuse & Over-Voltage Protection Relay
G00107618Courtesy of GENERAL MOTORS CORP.