LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Anti-Lock/Traction Control) >> Component Tests >> Wheel Speed Sensor Test >> Possible Results

Possible Results

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.

  1. Normal Operation

    As the wheel is spun, the needle should remain steady at a relatively constant value. Acceptable output ranges are included in the Diagnostic Trouble Trees.
  2. Low Output

    A low output condition is encountered when the needle remains steady at a value less than the acceptable minimums specified in the diagnostic information.
  3. Excessive Needle Bounce

    Large fluctuations in the meter reading as the wheel is turned at a constant speed may indicate excessive toothed sensor ring runout or damage. Needle fluctuations over a range greater than 1.0 units on the meter scale should be investigated.