LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Anti-Theft Systems) >> System Operation >> Personal Automotive Security System >> Ignition Key Resistor Input

Ignition Key Resistor Input

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.

The ignition key resistor inputs are used to determine if the correct key is being used to start the car. The ignition key resistor inputs are read only when the PASS Key module is first turned on. If the resistance value of the ignition key matches the value stored in the PASS Key module, then the starter enable relay and fuel enable output will allow the vehicle to start. If the resistance value of the ignition key does not match the value stored in the PASS Key module, the starter enable relay and fuel enable output will not allow the vehicle to start.

If the module has never read the key input (new module, open key input), the theft lamp will stay on and the module will not program. The engine will start even though the new module is not programmed.

Pass Key Resistance Values

Key Resistance Number Ohms Value
1 402
2 523
3 681
4 887
5 1130
6 1407
7 1870
8 2370
9 3010
10 3740
11 4750
12 6040
13 7500
14 9530
15 11800