LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Anti-Theft Systems) >> Programming >> Copying Passkey Ignition Keys

Copying Passkey Ignition Keys

WARNING: This page is about a different car, the 1990 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.

To copy a PASS Key ignition key, it is necessary to first determine which key code (resistance value) is needed. The ignition key being copied must be tested to determine the key code. The key may be by using J-35628, PASS Key (VATS) Interrogator. See SPECIAL TOOLS  . To use J-35628, turn the tool on, make sure the tool wiring connectors are disconnected and insert the key into the tool lock cylinder. The "Key Code Reader" will display the key code of the ignition key. The key may be tested using an ohmmeter. See Fig 1 . Obtain a key blank matching this key code and cut it to match the original key.

Fig 1: Determining Key Resistor Values
G00103244Courtesy of GENERAL MOTORS CORP.