LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Cruise Control Systems) >> System Tests >> Test B: Cruise Control Override Test >> ECM Override Test ES07

ECM Override Test ES07

WARNING: This page is about a different car, the 1989 Cadillac Allante, 1988 Cadillac Allante, and 1987 Cadillac Allante. However, it is still accessible from the selected car via links, so may be relevant.

The CRUISE FEEDBACK override can control the percent servo stroke commanded from the ECM. This override will work only at key off with a vacuum source connected to the cruise system. Pressing the WARMER button will command servo stroke to 99 (100% stroke) and pressing the COOLER button will decrease servo stroke to 00 (0% stroke). The ECM will hold the override value if the buttons are released.

Enter ECM diagnostics. Select ECM override test ES07. Turn cruise switch on. Start engine and run for 2 minutes and then turn engine off. Turn ignition on.

CRUISE CONTROL OVERRIDE TEST

Vary Override Value From Correct Result For Diagnosis
0 to 99 to 0 Cruise Control Servo Pulls In Fully & Then Releases (1)
If All Previous Tests Are Correct And The Cruise Control Servo Pulls In And Then Releases, Replace Engine Control Module (ECM).
(1) Check the vacuum source, vacuum release valve and hoses for leaks, kinks or restrictions. Check the cruise control servo for mechanical binding, if there is no binding, replace the cruise control servo.