System Operation Check
SYSTEM CHECK
| Action | Normal Result |
|---|---|
| 1) Operate The Passenger Seat Back Switch In The Recline & Up Positions | Back Of Passenger Seat Reclines & Moves Up In Response To Operation Of Seat Switch |
| 2) Operate The Passenger Rear Height Switch In The Up & Down Positions | The Rear Seat Height Moves Up & Down |
| 3) Operate The Passenger Front Height Switch In The Up & Down Positions | The Front Seat Height Moves Up & Down |
| 4) Operate The Passenger Entire Seat Switch In The Up & Down Positions | The Entire Seat Height Moves Up & Down |
| 5) Operate The Passenger Forward/Back Seat Switch In The Forward & Back Positions | The Seat Moves Forward & Back |
| The Following Steps Are For The Driver Memory Seat Only | |
| 6) Repeat Steps 1 Through 5 Using The Driver Seat Switches | Results Are The Same As For The Passenger Seat Switches |
| 7) With The Gear Selector In PARK, Hold The Set Button, Then Press Memory 1 Button (This Removes Any Previously Stored Seat Position From Memory) | The Current Seat Position Is Stored In Memory |
| 8) Using The Seat Switches, Move The Seat To A Different Position, Then Press MEMORY 1 Button | The Seat Automatically Returns To The Position Stored In Step 7 |
| 9) Using The Seat Switches, Move The Seat To A New Position, Then Hold SET Button & Press MEMORY 2 button | The New Seat Position Is Stored In Memory |
| 10) Move The Seat To A Different Position, Then Press MEMORY 2 | The Seat Automatically Returns To The Position Stored In Step 9 |
| 11) Put Gear Selector In Any Position Except PARK & Momentarily Press MEMORY 1 Button | The Seat Moves While The Button Is Held |
| 12) With The Gear Selector In Any Position Except PARK, Press & Hold MEMORY 1 Button Until The Seat Stops | The Seat Moves To Position Stored In Step 7 |
| 13) Put The Gear Selector In PARK & Press The EXIT Button | The Driver Seat Moves To Stored Exit Position To Allow Easy Exit From The Vehicle |