Description & Operation: Notes
WARNING:
Vehicle is equipped with air bag supplemental restraint system. Before attempting any repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in appropriate AIR BAG RESTRAINT SYSTEMS article.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
The Allante is equipped with Keiper-Recaro Seats. Each seat is equipped with the following standard features:
- Six-way power
- Power recliner mechanism
- Power lumbar adjustment
- Programmable memory on driver's seat
The lumbar design uses a metal grid operated by an electric motor instead of a bladder type mechanism. The driver and passenger seat controls are located on the outboard side of the seat. The seats can be operated as follows.
- The front control switch operates the seat back reclining mechanism.
- The second control switch provides up and down movement of the front of the seat.
- The third control switch moves the entire seat up or down, and forward and rearward.
- The fourth control switch provides up and down movement of the rear of the seat.
- The fifth control switch provides movement of the lumbar support.
There are four reversible motors that operate the power seats. The front and back height of a seat are operated by different motors. They can be raised or lowered independently of each other. When the entire seat switch is pushed to the UP and DOWN position, both motors run to move the front and back of the seat at the same time.