LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 1992 >> Allante F7/ME9 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Computer Module >> Diagnostic Tests >> DTC B420: BCM Output Driver No. 1 Failure >> Notes On Intermittents

Notes On Intermittents

If DTC B441 is also set then CKT 790 should be checked for intermittent connections. If the code B441 is not set, then the CKT 961 and pin 1-C6 should be checked for intermittent connections.

NOTE: The following numbered steps refer to circled numbers on diagnostic chart. See Fig 1 . For circuit identification, see Fig 2 .
  1. This determines which of the outputs are suspect.
  2. The following steps will determine which failure is the likely cause for the code.
Fig 1: DTC B420: BCM Output Driver No. 1 Failure Flow Chart Circuit
G00133549Courtesy of GENERAL MOTORS CORP.
Fig 2: DTC B420: BCM Output Driver No. 1 Failure Flow Chart Circuit
G00133550Courtesy of GENERAL MOTORS CORP.