Note On Intermittents
If only DTC B333 is stored as "History", check the power and grounds for intermittent faults and CKT 800 to the BCM for an intermittent open circuit.
NOTE:
The following numbered steps refer to circled numbers on diagnostic chart. See Fig 1
. For circuit identification, see Figure
.
- Under normal conditions, the DERM will cycle the telltale between 7 and 9 times at key on. If this is not happening, a power, ground, or internal DERM failure is indicated. These conditions are diagnosed in air bag restraint systems. See appropriate 1990-91 AIR BAGS -- ALLANTE or 1992 AIR BAGS -- ALLANTE article.
- If multiple codes are present, a data line fault is indicated and should be diagnosed using the preceding multiple communication code chart.
- A normal data line will fluctuate voltage as data signals are sent. If the voltage does not fluctuate at the DERM connector A8, an open in CKT 800 between the DERM and the BCM is indicated.